BATCAM 2.0
17
Next, icons(objects) on the right side of the main screen. There are four icons(objects) on the right side of
the screen, each icon's
(object’s)
function, definition, and description are shown in the table below.
Icon(Object)
Function
Description
Threshold
(Display Reference
Value) Setting
The beampower shown on the screen depends on the set
reference value. This means that the noise you are trying to
measure must be greater than or equal to the display
reference value before the beam power appears on the
screen. Inversely, if the noise is less than the set reference
value, the screen does not display the beam power. For
accurate measurements, it is recommended that you check
the display reference value settings before the measurement,
depending on your measurement environment. The reference
value can be set from 0 dB to 120 dB, depending on the
characteristics of the noise being measured and the
measurement environment.
Measurement
File(Image/Video)
Transfer to USB
Mount the USB memory device in a USB port located on the
left side of BATCAM 2.0(if user is viewing the screen), and press
this icon(object) to copy the measured pictures and videos to
the USB memory device. If the USB memory device is not
www.
GlobalTestSupply
.com
Find Quality Products Online at:
