5
Support: www.slxtechnology.com/support
Booster
In Out
Frequency
VHF Signal
UHF Signal
Suitable
for
Gain Noise
Typ.
Isolation
Out/Out
Max
Output
IR
Bypass
IR Power
27822BMR
SLx2 IR
1
2
87-790MHz
FM/DAB/
TV Ch21-60
Freeview
17dB <3dB
12dB
94dBµV 5-30MHz
+3dB
9VDC
15mA SSP
If you experience reception problems after
installing the your booster, please see below:
No picture or sound
Is the signal reaching your TV? Check:
- Everything, including the booster is
switched on
- Coaxial connections are correctly made
(no braid or foil touching the inner core)
Picture or sound breaking up
- Use the best wideband aerial ideally fitted
outdoors
- Use good quality coax cable, poorly
screened cable can pick up noise
- In some cases too much signal can cause
signal break-up which can be solved
by fitting an attenuator to the input to the
booster
For specific help with digital TV reception
problems, visit
www.digitaluk.co.uk
or
www.bbc.co.uk/reception/television/
freeview/reception_problems
Problems with satellite television
If you are experiencing any problems with
your satellite television picture, check that
all cables and connectors have been fitted
correctly. If the problem persists it is probably
due to the dish alignment or a temporary
problem with the channel transmissions.
Please contact your local satellite dealer if the
problem persists.
Specifications
Troubleshooting
Philex reserve the right to modify their designs or specifications, In the light of future
developments, without prior notice. Performance figures quoted are typical and subject to
normal manufacturing and service tolerances.
