Explanation of the safety warnings:
DANGER:
immediate dangerous situation leading to death or severe
injuries when not avoided.
WARNING:
possible dangerous situation leading to death or severe
injuries when not avoided.
CAUTION:
possible dangerous situation leading to injuries or material
damage when not avoided.
1. NOTES ON SAFETY
Installation, mounting or works on the electrical connection may
only be carried out by an approved electrician.
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no decoration.
Keep children away from the product.
Operate the product only when it functions properly:
DANGER
In case of a
malfunction
you may
NOT
touch the product or operate it
further. Disconnect the product from the power supply by an external switch
or by the fuse.
If touched or further operated there is
danger from electric shock,
burning, or fire.
A
malfunction
exists when:
visible damages appear.
the product does not work properly (e.g. flickering).
smoke, steam or crackling sounds appear.
smell of burning is recognisable.
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
2. USE AS DIRECTED
This product serves exclusively lighting purposes and may:
only be operated using a suitable mains adapter (i.e. SLV Art.-no.
470507/08), output: 1
2V DC
(Direct voltage).
not be exposed to strong mechanical loads or to strong contamination.
only be installed and operated after a condition inspection if the product
is dirty or has been moistened through storage.
not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
3. OPERATION
WARNING
High currents with low-voltage installations!
Check all electrical connections once in a while for a secure fit.
CAUTION
Exchange the light source always before it reaches its lifespan, to avoid
personal injuries, or damages of the fixture or other objects.
Disconnect the product from the power supply
, before you exchange
the bulbs. Let the
light source cool down
before replacement.
There exists danger of burning!
Use only light sources that are approved for the product. Approved light
sources are indicated on the type label.
Other types of light sources may cause
fire risk
,
damage the product
or
lead to malfunction
.
Replacing the light source:
Under regular usage the LED bulb has an
extraordinary long lifetime. If nevertheless damage or failure occurs,
contact your local dealer to exchange the LED bulb.
4. MAINTANANCE AND CARE
The following enviromental influences may have unwanted effects on
the surface of the product:
acid rain and sour soil
high salt content in the air
thawing salt
cleaning agents
fertilizer especially in flowerbeds
other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
WARNING
Disconnect the product from the power supply
and let it
cool down
,
before you do maintenance or clean the product.
If disregarded there may be
danger of electric shock
or by burning
when cleaning the product.
Cleaning:
Clean the product on a regular basis using a slightly
moistened, soft and fluff-free cloth.
5. ADDITIONAL IMPORTANT NOTES
Storage:
The product must be stored in a dry and clean environment. Do
not strain the product mechanically during storage.
Warranty:
In case of a warranty contact your dealer.
Disposal:
Notes on the correct disposal in Germany are found on
www.slv.de.
6. INSTALLATION
(only by an approved electrician)
Indication for the installer
: In case you do not install a completely
supplied system (with transformer), you are considered a "manufacturer" by
the low-voltage directive. In this case you are required to ensure the
conformity of the whole system and declare it by attaching the
CE-sign.
WARNING
Switch off the mains
or respectively the connection lead before doing
any works.
There exists
mortal danger from an electric shock
.
High currents with low-voltage installations!
Use only heat resistant wires and clamps to avoid danger of fire.
Use only parts, which are supplied with the product or are described as
accessories
!
Otherwise the product or the whole installation may not be secure.
Danger for life or danger of fire may exist!
Inspect the product for
loose parts
inside the housing. When there are
loose parts inside the housing and these are not explicitly described the
product may not be installed or operated.
The housing maybe voltage-carrying.
Danger of electric shock!
Use the supplied
fastening material
only when it is suited for the
installation background. If this is not the case use only fastening material
suiting the installation background.
When using fastening material that is not suitable there may be
danger from falling objects.
Unpacking
Consignment:
shrinking tube
Carefully take the product out of the packaging removing any transport
safeguards.
Before disposal of the packaging material make sure that all
components of the product are removed.
Installation place
The product is solely suited for
wall and ceiling installation
.
Make sure that the product is mounted on a
stable, even and tilt-fixed
background
.
Separate Installation Steps
Before installation switch the power supply line completely dead.
Otherwise the LED will be destroyed!
Power feeding
Use a suitable mains adapter, output: 12V DC. Note the manufacturers
instructions! Connect the (+) wire to the (+) clamp and the (-) wire to the
(-) clamp on the mains adapter.
550621/22/24/25/26/27/30: You may connect up to three strips. Connect
the corresponding wires.
The strip may be cut each three LED. Note the arrow symbol on the
strip.
Cut the strips at the desired length. When not applying a feed-in on the
resulting open ends these need to be sealed to keep the safety type.
Use the supplied shrinking tube.
The strips may be attached on the mounting surface using the
attachment clips.
Check if the product functions properly and is securely fixed.
The product is now ready for operation.
art.-no. 550621/22/24/25/26/27/30 550721/22
10/2009
©
SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-
Palenberg, Germany, Tel. +49 (0)2451 4833-0
Technical Details are subject to change.
SLV Elektronik GmbH
ENGLISH
INSTRUCTION MANUAL FOR
SILIKON LED FLEXSTRIPS
