Code No. 0816693
Rev. 7 (02/22)
INSTALLATION INSTRUCTIONS FOR
TRUFLUSH ELECTRONIC CLOSET AND URINAL FLUSHOMETERS
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants this product,
manufactured and sold for commercial or industrial uses, to be free
from defects in material and workmanship for a period of three (3)
years (one (1) year for special finishes, SF faucets, PWT electronics
and 30 days for PWT software) from date of first purchase. During
this period, Sloan Valve Company will, at its option, repair, replace, or
refund the purchase price of any product which fails to conform with
this warranty under normal use and service. This shall be the sole and
exclusive remedy under this warranty. Products must be returned to
Sloan Valve Company, at customer’s cost. No claims will be allowed
for labor, transportation or other costs. This warranty extends only
to persons or organizations who purchase Sloan Valve Company’s
products directly from Sloan Valve Company for purpose of resale.
This warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE
HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL
DAMAGES OF ANY MEASURE WHATSOEVER.
TruFlush Models:
TRF 8156-1.6
TRF 8156-1.28
TRF 8156-1.1
TRF 8196-0.5
TRF 8196-0.25
TRF 8196-0.125
PRIOR TO INSTALLATION
TOOLS REQUIRED FOR INSTALLATION
• Smooth-jawed wrench (at least 2”) • Phillips screwdriver • 5/64” hex wrench (supplied) • Adjusting tool (supplied) • Flathead screwdriver .118”
(3 mm or below) • Wire stripper tool
T
his valve is designed for new construction or where there is easily
accessed plumbing for the fixture and the valve.
This valve is designed for minimum six inch (152 mm) wall space
depth. Distance from center of the valve (inlet or outlet pipe) to the
finished surface of the wall can vary from 2”-3” (51-76 mm).
Wall plate opening must be of 5.6” x 5.6” (142 x 142 mm). Mud plate
is provided and must accompany valve for proper installation. Mud
plate is removed after wall is finished.
ITEMS INCLUDED WITH THE PRODUCT
1. Wall Box and Electronic Valve Assembly
2. Mud Guard
3. Adjustment Tool
4. (2) #8-32 x 2” screws to secure mud guard
5. (2) 1/4”-20 x 2” screws to remove activation
assembly
6. Installation instructions
1. Wall Bracket
2. Wall Plate
3. Sensor Assembly
4. Activation Button
5. Battery Pack
6. (4) Batteries
7.(4) #8-32 x 2 Screws
8. Allen Key
9. Installation instructions
2. Mud Guard
1. Wall box and electronic
Valve Asembly
4. Mud Guard Screws
3. Adjustment Tool
VALVE BOX
WALL PLATE BOX
1. Wall Bracket
2. Wall Plate
3.Sensor Assembly 4. Activation Button
5. Battery Pack
6. (4) Batteries
7. (4) #8-32 x 2 Screws
5. Activation Assembly
Screws
8. Allen
Key
9. Instructions
6. Instructions
1
