background image

SLEEVE ASSEMBLY

FLAT NOTCH

COLLAR NUT

GASKET

DO NOT REMOVE STICKER FROM SENSOR 

WINDOW UNTIL STEP 2.

Close the control stop.
Using the supplied collar wrench, remove handle  
from flushometer, if applicable.

NOTE:

 On some flushometers with  

a faulty air vent, or recently flushed valve, be  
prepared to collect a small amount of water with a  
rag or sponge placed under the handle.
Place sleeve assembly with flat notch facing  
upwards into collar nut and attach the Side Mount  
unit where the handle was removed.

NOTE:

 Failure to install flat notch correctly can 

result in damage to the unit.
Tighten collar nut with supplied collar wrench.  
Open the control stop.

NOTE:

 Save the handle in the event you wish to 

return to manual flushometer.

LIMITED WARRANTY

Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material 
and workmanship for a period of three (3) years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from date of first 
purchase. During this period, Sloan Valve Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this 
warranty under normal use and service. This shall be the sole and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at 
customer’s cost. No claims will be allowed for labor, transportation or other costs. This warranty extends only to persons or organizations who purchase Sloan Valve 
Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF 

ANY MEASURE WHATSOEVER.

1 - INSTALLATION (FOR EITHER LEFT- OR RIGHT-HAND)

Optima Plus

®

 Dual-Flush and Single-Flush

Side Mount Unit Installation Instructions

Code No. 9108310

Rev. 6 (08/13)

EBV-500-A

Single-Flush Side Mount

EBV-550-A

Dual-Flush Side Mount

Отзывы: