background image

Repair Parts and Maintenance Guide

142

The information contained in this document is subject to change without notice.

BASYS

®

 

Infrared Sensor Activated

NOTE: Turning off water is not necessary, due to integrated automatic stop 

valve.

Rotate solenoid assembly counter-

clockwise through a 45º angle.

Pull solenoid caddy from faucet.

NOTE: Strainer can be removed, 

cleaned and replaced at this time.

Insert new solenoid caddy at a 45° 

angle.
Rotate solenoid caddy clockwise to 

align with arrow, locking the unit 

and opening water path.

Remove crown by loosening hex 

screw located on underside of spout 

and slide crown down and lift off.

NOTE: Screw is captive within 

faucet body and will not fall out.

REPLACING THE SOLENOID STRAINER (FILTER)

Slide on crown and secure.

NOTE: Turning off water is not necessary, due to integrated automatic stop 

valve.

Retrieve spray removal tool located 

near the spray insert.

Insert spray removal tool into spray 

slot by sliding hook end of key 

between faucet spout and insert. 

Pull insert out of faucet once 

hooked.

Remove crown by loosening hex 

screw located on underside of spout 

and slide crown down and lift off.

NOTE: Screw is captive within 

faucet body and will not fall out.

REPLACE SPRAY INSERT

UNLOCK

LOCK

Install new insert.

NOTE: If changing to a different 

fl ow rate solenoid caddy must 

be changed in conjunction.

Return spray removal tool to storage 

location.

NOTE: This can only be done once 

spray head is installed. This will 

lock the spray head in place.
NOTE: If spray head is inserted 

incorrectly – key will not lock in 

properly. Turn faucet on to push 

insert out and re-install.

Slide on crown and secure.

UNLOCK

LOCK

Faucets and  Soap Dispensers

Repair Parts and Maintenance Guide

143

The information contained in this document is subject to change without notice.

BASYS

®

 

Infrared Sensor Activated

PARTS LIST—BASYS FAUCETS
Item  

No.   Code No. 

Part No. 

Description

 1. 

 

— 

Wall Mount Faucet Assembly

 2. 

3324104

 

EFX-1002-A   0.5 gpm/1.9 Lpm Multi-Lam Spray Head (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  

3324103

 

EFX-1001-A   1.5 gpm/5.7 Lpm Aerated Stream Insert (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  

3324102

 

EFX-1000-A   1.5 gpm/5.7 Lpm Laminar Stream Insert (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  3. 

3324162

 

EFX-1011-A   0.5 gpm/1.9 Lpm Solenoid Valve Caddy Assembly 

– Wall (Green)‡

  

3324163

 

EFX-1012-A   1.5 gpm/5.7 Lpm Solenoid Valve Caddy Assembly 

– Wall (Blue) ‡

 4. 

0324019

 

EFX-19 

Strainer (Filter)

 5. 

 

EFX-1013-A  Mounting Assembly

 6A. 

3324160

 

EFX-1009-A  Bowed Crown Assembly

 6B. 

3324138

 

EFX-1010-A  Solar Crown Assembly

 6C. 

3324139

 

EFX-1018-A  Solar Crown with LCD Assembly

 7. 

 

— 

CR-P2 Lithium Battery

 8. 

3326009

 

MIX-60-A 

Mechanical, Below Deck Mixing Valve

 9. 

0326045

 

MIX-135-A  Thermostatic, Below Deck Mixing Valve

 10. 

3365461

 

ETF-617-A  Bak-Chek Tee Assembly

 11. 

0335023

  EAF-23-A Splitter

 12. 

0335024

 

EAF-24-A  11-13/16” (300 mm) Extension Cable

  

0335025

 

EAF-25-A  47-1/4” (1200 mm) Extension Cable

  

0335015

 

EAF-17-A  126” (3200 mm) Extension Cable

 13. 

0335009

 

EAF-11 

Plug-in Voltage Adapter (US)

  

0335041

     EAF-41 

Plug-in Voltage Adapter (EU)

  

0335039

     EAF-39 

Plug-in Voltage Adapter (UK)

  

0335037

     EAF-37 

Box Type Voltage Adapter

 14. 

3324165

 

EFX-1014-A  Wall Flange

 15. 

 

— 

Purge Tool

NOTE: If changing fl ow rate caddy and spray insert must be changed in conjunction.
† Single Supply faucets include Bak-Chek

®

— in Item No. column = Not shown in illustration
— in Code No. and Part No. column = Not sold separately 

‡ Old style / T-shaped contact. 
   New style / Plug contact

6A

6B

6C

14

7

4

1

5

8

3

9

10

13

15

12

11

2

Electrical Connection for up to Six (6) Faucets Using One (1) Adapter

EFX-8XX SERIES

NOTE: HARDWIRE FAUCETS SUPPLIED WITH ONE (1) 47” (1.2 m) EXTENSION CABLE.
NOTE: EXTENSION CABLES AVAILABLE SEPARATELY.
NOTE: USE ONLY SLOAN SUPPLIED POLARIZED AND KEYED CABLE ASSEMBLIES.

IMPORTANT: CUTTING AND SPLICING WIRES WILL VOID WARRANTY.

SPLITTER AND 
EXTENSION CABLE

6 VDC
PLUG-IN
ADAPTER

CABLE
BEHIND
THE WALL

CABLE
BEHIND
THE WALL

CABLE
BEHIND
THE WALL

SPLITTER AND 
EXTENSION CABLE

TO ADDITIONAL 
FAUCETS (6 MAX)

Faucets and

Soap Dispensers

372626_Master_Book_ccg.indd   140

9/18/17   7:53 AM

Отзывы: