Sloan
®
AQUS
®
Water Conservation
System Installation Instructions
The Sloan
®
AQUS
®
Water Conservation
System is designed to reclaim sink water as
an alternative means for flushing toilets. It
operates with most, gravity-fed toilets.
The system prevents cross-contamination of
the fresh water system and does not interfere
with backflow prevention.
The following instructions will serve as a
guide when installing the Sloan
®
AQUS
®
Water Conservation System. As always, good
safety practices and care are recommended
during installation. If further assistance is
required, please contact your nearest Sloan
Representative office.
Model
HMA-7000
Code No: 0816444
Rev. 2 (05/10)
LIMITED WARRANTY
Sloan Valve Company warrants the Sloan AQUS Water Conservation System to be made of first class materials, free from defects of material
or workmanship under normal use and to perform the service for which it is intended in a thoroughly reliable and efficient manner when
properly installed and serviced, for a period of 1 year from date of purchase. During this period, Sloan Valve Company will, at its option,
repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be
the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty
extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of
resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
AQUS WCS Installation Instructions 5/25/10 2:01 PM Page 1
