Slingshot TURBO 2, Инструкция по эксплуатации

Страница: 22 / 40

007 TURBO INSTRUCTION MANUAL 007 TURBO INSTRUCTION MANUAL
LARK’S hEAd KNOT
STEP 1
Shape the loop at the end of your flying
line so it is round and fold the loop over
onto itself at the point where the stitch-
ing ends next to the loop.
STEP 2
Push the sewn portion of the flying line
through the round loop.
STEP 3
The end of your line should look like
this. You may need to untwist the loop
slightly to get it to look as shown in this
picture.
STEP 4
Slide the knotted end of the line that
you are connecting to through the open-
ing of the larks head you just formed.
Cinch down the larks hard and pull it up
tight against the knot on the other line.
Pull both lines away from one another to
make sure the knot is properly secured.
KITE SET-UP