Slinex ML-30CR Скачать руководство пользователя страница 9

ML-30CR

15

16

There is also an alternative way to add wireless unlock keys. In standby mode 
shortly press «reset» button (situated under resin cap on the back cover of 
the door panel, see page 6). Then touch the new keys near wireless card 
reader zone one by one. After adding all the wireless keys shortly press 
«reset» button again to exit into standby mode. Using this method wireless 
unlock keys automatically added to the free cells.

6.6. Wireless unlock key deleting

1)  In standby mode enter master password  (default master password is 

1234) and press # button to enter settings mode. Double long beep 
sound will be heard;

2)  Press 4 and # button to enter into wireless unlock key deleting mode. 

One long beep sound will be heard;

3)  Enter 3-digit cell number from 000 to 199, and press # button to delete 

the password which this cell contains. One long beep sound will be 
heard.  Enter 99 instead of cell number and press # button to delete all 
wireless unlock keys;

4)  User can continue unlock key deleting by entering cell number and 

pressing # button after each cell number;

5)  Press * button twice to exit into standby mode. Double short beep sound 

will be heard.

6.5. Wireless unlock key setting

1)  In standby mode enter master password  (default master password is 

1234) and press # button to enter settings mode. Double long beep 
sound will be heard;

2)  Press 3 and # button to enter into wireless unlock key setting mode. One 

long beep sound will be heard;

3)  Enter 3-digit cell number from 000 to 199, and press # button. One long 

beep sound will be heard;

4)  Touch the new key near wireless card reader zone. One long beep sound 

will be heard in case of successfull adding.  If current cell is already 
occupied then double short beep sound will be heard;

5)  User can continue adding new wireless keys by touching them near 

wireless card reade. In that case every next key will be added into the 
next cell number;

6)  Press * button twice to exit into standby mode. Double short beep sound 

will be heard.

Example: 

add wireless key into 003 cell number
1234# 3# 003# touch the wireless key near card reader zone **

Содержание ML-30CR












Отзывы: