ML-30CR
9
10
5. Installation
Diagram 2. Mechanical lock connection using separate power supply.
Blue
Brown
Diagram 3. Magnetic lock connection.
Door open
button
Blue
Green
Orange
Black
DOOR
OPEN
Mechanical lock
Power supply
Magnetic lock
Power supply
Angle mounting:
1) Take the angle bracket from the kit and place it 150-160 cm from the floor
line;
2) Mark and drill two halls inside the wall;
3) Take two nuts from the kit and hammer them into the drilled halls;
4) Fix angle bracket on the wall with two screws from the kit;
5) Fix surface mounting bracket on the angle bracket with two screws from
the kit;
6) Connect all communication wires and fix the door panel on the surface
mounting bracket with the screw from the down side.
