{ Design. Uniqueness. Innovations }
11
12
«Unlock ID cards setup» and «delete card» modes
1) In standby mode situate management card near the card reader to enter
«unlock cards setup» mode. Door panel will emmit double sound and
backlight of the call button will becomes blue;
2) Situate every unlock ID card that need to be added near card reader, one
by one. After each card reading, double sound signal can be heard. In case
if current ID card has been already added to the card reader memory then
three time sound signal can be heard while touching it near the card
reader;
3) When all unlock ID cards have been added then situate management card
near the card reader to enter «delete card» mode. Door panel will emmit
double sound and backlight of the call button will becomes red;
4) Situate any unlock ID card that need to be deleted near card reader while
«delete card» mode is active. After double short sound current ID card will
be deleted from the door panel list;
5) While
«delete card» mode is active, situate management card near the
card reader to exit into standby mode.
6) Wait for 10 seconds without any actions in «unlock cards setup» or «delete
card» modes to exit into standby mode automatically.
7) Maximum unlock ID cards quantity that can be added to the card reader
memory is 248 pcs.
7. Video camera settings
Door panel video camera can work in three basic modes:
analog (CVBS), AHD and CVI. As AHD and СVI are high
resolution formats, so they have better quality then
analog (СVBS). While using high resolutioon modes the
monitor should maintain that kind of signal (AHD or CVI),
otherwise there will be no image on the monitor screen.
Press and hold mode switching button on the back of the
door panel during 8 seconds to switch video camera
mode in such sequence: CVBS
→
AHD
→
CVI.
Camera mode
switching
button is
under resin cap
ACCESSORIES
SERIES
Sound and visual indication.
Door unlock successfull – double short «beep» and call button backlight
becomes blue twice;
No such unlock card – triple short «beep» and call button backlight becomes
red twice;
«Unlock ID cards setup» mode – call button backlight is constantly blue;
«Delete card» mode – call button backlight is constantly red;
Standby mode – call button backlight is constantly white;
Card setup successfull – double «beep»;
Card is already added – four times short «beep».
