{ Design. Uniqueness. Innovations }
7
8
Flat mounting:
1) Take the wall mounting bracket from the kit and situate it 150-160 cm from
the floor line;
2) Mark and drill four halls inside the wall;
3) Take four nuts from the kit and hammer them into the drilled halls;
4) Fix the wall mounting bracket on the wall by the screws from the kit;
5) Connect all communication wires and fix the door panel on the wall
mounting bracket by the screw from the down side.
Angle mounting:
1) Take the angle bracket from the kit and situate it 150-160 cm from the floor
line;
2) Mark and drill two halls inside the wall;
3) Take two nuts from the kit and hammer them into the drilled halls;
4) Fix angle bracket on the wall by two screws from the kit;
5) Fix wall mounting bracket on the angle bracket by two screws from the kit;
6) Connect all communication wires and fix the door panel on the wall
mounting bracket by the screw from the down side.
5. Installation
ACCESSORIES
SERIES
