{ Design. Uniqueness. Innovations }
9
10
6. ID card reader settings
C12V power supply through the orange (+) and grey (–) wires of the
door panel communication cable.
Memory reset
Press and hold «ID card reader reset button» during 5 seconds (button situated
on the back side and signed as 9 on page 6), until repeatable sound will be
heard. It means that ID card reader memry was formatted.
Manager ID card setup
1) Press
«ID card reader reset button» shortly to enter manager ID card setup
mode. User will hear a short sound and door panel backlight becomes
blue;
2) Take the ID card that should be used as manager card and touch it near
card reader zone on the front of the door panel. If manager card setup was
succesfull then user will hear long sound. (If user doesn’t touch ID card
near card reader during 10 seconds then door panel will be automatically
switched into standby mode). Only one manager ID card can be added to
the card reader memory.
SL-10M
ML-20CR
Lock
Lock power
supply
Orange (+)
Grey(–)
Brown
Blue
ID card reader
power supply
5. Schematic diagram
Power (Red)
Audio (White)
GND (Black)
Video (Yellow)
Video
GND
Audio
Po
w
er
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
ACCESSORIES
SERIES
