TECH SPECS
TIRE INFLATION TIME
CFM
DIGITAL GAUGE
POWER SOURCE
POWER SOURCE
12
V POWER CORD LENGTH
120
V POWER CORD LENGTH
AIR HOSE LENGTH
TOTAL REACH
REPLACEABLE FUSE
* (
0-35
PSI, Standard Tire: P
195/65
R
15
)
6 min*
0.58
(
16.4
LPM)
0-99
PSI
12
V Accessory Power Outlet
120
V Wall Outlet
9.67
ft. (
294.7
cm)
36
in. (
91
cm)
2.46
ft. (
75
cm)
12
V:
12
ft. (
365
cm) /
120
V:
5.45
ft. (
166
cm)
12V: 15A 250V 5
mm
x 20
mm
/ 120V: 2A 250V 5
mm
x 20
mm
INFLATE TIRES
1. Screw air hose connector onto tire's valve stem.
2. Plug power cord into 120 volt wall power outlet or 12 volt accessory power outlet.
3. Use the toggle switch to power the inflator depending on the energy source you
have chosen. Inflate tire to manufacturer's recommended air pressure. *When
proper pressure is reached, press off switch to turn off inflator. Unplug power cord
and remove air hose connector.
CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON
A HARD, CLEAN SURFACE.
1. DO NOT run vehicle while inflator is operating. You may need to be in "accessory" or
"on" position. Please make sure emergency brake is set and car is in park.
2. Always ensure air hose chuck touches the core of the valve stem for proper inflation.
3. DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inflator unattended.
4. ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
5. Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings.
Be careful not to inflate items beyond their capacity.
6. While operating, never block the inflator input or output.
7. Keep inflator out of reach of children.
8. For use with 120V outlets or with 12V DC power outlets rated 15 amps or higher. Do
not use with older 8 amp cigarette lighter receptacles.
