Slide Kamera HPN-2, Руководство пользователя

Страница: 11 / 18

11
To remap drive’s assignment, enter
the
Map to
in Settings menu for an
axis currently assigned to the drive
you want to change. The selected
drive is marked with a
*
symbol.
Navigate the cursor to the axis you
want the drive do be assigned to
and press ENTER. The drive’s name
will appear next to the chosen axis
number (if there is any drive assigned
to that axis, the drives will change places).
Playback
- behaviour of the axis during playing the content of memory
banks:
ON
- the axis plays back recorded data;
MAN
- manual mode; recorded data for this axis will be discarded, Live
mode will be used instead (you can operate this axis by hand during
playback);
PRLX
- available for panorama axis only: the head works in parallax mode
- advanced solution for tracking shots; position of the head is linked to
the recorded slider’s position (the camera rotates as the slider moves),
movement of the joystick doesn’t affect the rotation of the head;
OFF
- the axis is inactive.
Invert
- reverse the direction of the motion; relevant in some hardware
configurations (e.g. when operator of the controller stands on the other side of
the slider, or the remote head operates upside down):
ON
- the motion is reversed;
OFF
- the axis operates as usual.
Rebound
- the direction of the motion will be reversed when the drive (e.g.
the slider’s cart) reaches one of the extreme positions; this feature is useful for
a simple loop of a slider’s cart - when Rebound is enabled, you can simply set
a slider’s speed with a Slider knob and the cart will run back and forth until you
set the Slider knob to 0.
ON
- the Rebound is enabled;
OFF
- the Rebound is disabled, the drive stops at the end of a working
range defined in calibration process.
Parallax
- advanced tracking mode, used to keep the object in frame
regardless the position on the slider; for setting and operating the Parallax
mode refer to “9. PARALLAX” (p. 12) .
Calibrate
- recalibrate the axis; use this option to perform calibration for
selected axis only;
Map to
- set a different drive to use particular controller (e.g. you can set the
joystick to control the motion of a slider, etc.).
Info
- additional informations about the axis and assigned drive.
CANCEL
- discard changes and exit the menu;
BACK
- save changes and exit.
TIP
Recorded keyframes and moves
are assigned to the drive, not the
axis number - so when you swap
the drive’s axes the motion will be
played back correctly.
<MAP TO ~
›1S SLIDER * |
2P PANORAMA |
3T TILT }
<MAP TO ~
1P PANORAMA |
›2S SLIDER * |
3T TILT }