9
AION
TM
IQ
[Recording]
> [Playback] 59s
Playback 0.0
No Records
When you select [Playback] there will be a message displayed on the screen:
Go Home?”
. The controller requires the user decision whether the
cart should return to the position where the recording of movement started
(
-> Y
) or whether to start playing back the movement from the current position
of the cart (
N <-
). Select the option by moving the joystick in the appropriate
direction. You can return to VIDEO menu at any time by pressing the joystick.
The controller displays information about the current position of the cart
[1]
and
the current/ overall time of the recording
[2]
. As the recorded movement
stops press the joystick to return to
VIDEO
menu..
2.2.2.4. Video Loop
During VideoLoop mode the cart moves from one reference point to the other
without stop. It automatically turns back and starts moving in the opposite direc-
tion once it reaches the end of the movement range. There is no need for the
user to determine the direction of the movement. The user can change
SPEED
and
DAMPING
parameters at any time during the movement.
SPEED
knob
allows to set the speed value of the cart
[1]
.
DAMPING
knob allows to set
the acceleration/deceleration time
[2]
. Pressing the joystick causes the driving
motor to stop immediately and the centroller returns to
VIDEO
menu.
W In Vi-
deoLoop mode there is no „
-
” sign when the cart moves in the opposite
direction.
Current ly set speed of the cart
[1]
Acceleration/deceleration time
[2]
Playback 590.2
Go Home? N<- ->Y
Playback 7267.4
press OK to Play
Playback 722.1
Time: 7/59s
Playback 58.4
press OK to exit
1
2
VidLoop 856.6
36 3.1
1
2
IMPORTANT!
If you selected FREE Mode when
setting startup parameters it is im-
portant to remember that the drive
has no reference points set. Con-
sequently, it will move only in one
direction and will not turn back. Use
SPEED knob to adjust the speed of
the cart paying special attention so
it does not hit side feet of the slider.
