6
AION
TM
IQ
V”
: means that the battery voltage is too low. Replace
the battery immediately in order to avoid to a sudden
stop of the drive, which may result in damage
to the equipment.
t”
: (Thermal Warning) indicates temperature warning. Turn off the
drive immediately so as not to overheat the driving motor.
T”
: (Thermal Shutdown) indicates emergency drive shutdown due
to overheating. You should immediately turn off the drive and wait
until FAULT light switches off.
2.2.1.1. Driving motor automatic calibration
Please note that automatic calibration is only possible when working with the
slider. After selecting
[Calibration]
from „CONFIG” menu a message
appears on LCD:
Use the joystick to determine the direction of the movement so that the drive
can automatically set the reference points.
After the automatic calibration is performed there will be a message on the
screen displaying the length of motion range for the cart for your X
TM
SLIDER.
After the power is turned off the information is stored in the controller
so there is no need to repeat the procedure until you mount the drive on
a slider of a different length.
2.2.2. VIDEO
As you enter VIDEO program, a submenu will appear on the screen with dif-
ferent operating modes::
[Free Ride]
,
[Recording]
,
[Play-
back]
,
[VideoLoop]
,
<Back>
.”
If the backlight of the LCD screen
starts flashing and there wil be an
orange flashing light under FAULT
marking on the right socket of the
driving motor, the user is informed
about existing error. In such situ-
ation, immediately enter
CONFIG menu
→
[Info]
. Information about the
error should appear in the upper
right corner of the screen.
IMPORTANT!
CALIBRATION
<- or -> to run
CALIBRATION
in progress
Vin=9.8V V
L 1276.1mm
CALIBRATION
L 1276.1mm
> VIDEO <
TIMELAPSE
