Sleipner SE-IP60, Руководство по установке, Страница: 20 / 28

20
5897 14 2022
-
SE IP 60 s2
Control Panel Cable Installation
• All Sleipner control panels can be used in any combination.
• All control panels can be installed using:
• Y-connectors - for standard on/off
• T-connectors - for S-Link proportional power system.
(NB: If two or more control panels are operated at the same time in opposite directions, the electronic control box will stop the thruster until
it receives a single signal or thrust in one direction.)
• Sleipner on/off equipment it is entirely “plug & play” and require no additional confi guration setup.
See the Control panel manual for more information.
MC_0041
! Please refer to the graphic for special considerations relating to your model !
MG_0025
Thruster
Motor
Connect round end
of control adapter
1 2
3
4
2
1
3 4
Pin 4 Pin 3 Pin 2
Pin 4 Pin 3 Pin 2