SLE 800 Series, Руководство по эксплуатации

Страница: 23 / 43

•
Different height of type due to mixing Do not mix old type with new type.
of type from different type sets.
•
Worn or damaged type Replace with a new type set.
•
Worn cushion board on Printing Table Replace cushion board.
•
Foil overlapping Increase foil pull by adjusting the Foil Rack.
•
Inappropriate foil for this application Try another foil.
•
Insufficient pressure. Press Handle slightly harder,
•
Printing Table unleveled Adjust printing table using the following
procedure.
Adjusting the Printing Table
Because of various uncontrollable factors, such as vibration, uneven die mounting, etc., it may
become necessary to adjust the level of the machine table in order to achieve even impressions.
1. Release the Locking Screw underneath the Wooden Base.
2. Make a test imprint on a card.
3. Based on the result of the test imprint, decide which corner of the Printing Table needs
adjustment. Too strong an impression on one corner, relative to the other corners, means the
table needs to be lowered. A weak impression means the table needs to be raised.
4. Turn the appropriate Hexagon Nut(s) underneath the Printing Table with the supplied
wrench.
•
Clockwise = Raise table
•
Counterclockwise = Lower table
Locking
Hexagon