17
2.2 Cable ribbon connection (C48 cabinet)
Figure 1.
After fitting the C48 cabinet on the wall,
be sure to connect the cable ribbon (red connector)
on the alarm reports board.
3
Connection
3.1 Connection diagram
Figure 2. Wiring
The cable tie included with all the
products allows the mains cable to be
secured to the mains terminal strip
.
The output core for the outputs
(Load1 and load2) is :
-
to be installed on
C48
cabinet.
-
installed on
C85
cabinet.
Figure 3. Alarm reports wiring
Important
The openings provided in the cabinet must be used.
Do not create additional openings as doing so may cause the device
to malfunction and voids the warranty, except locations on C85
cabinet.
