Slant/Fin VGH-100-CH, Руководство пользователя

Страница: 27 / 32

27
E95.1901EN032 User manual Slant Fin VGH-CH / CO
Blocking
code
Error Description Cause Solving
164 LOWEXFLOW_
PROTECTION Flow is too low, demand
needs to be stopped with
fan at ignition speed*, but
no error needed to be
stored at this time not enough water
flow through heat
exchanger If the boiler does not start
after Reset, contact your
installer
165 VSUPPLY_TOO
_LOW Main supply voltage too low
for more than 60 seconds dip in power supply
to boiler Check power supply
166 VSUPPLY_TOO
_HIGH Main supply voltage too
high for more than 60 sec. peak in power
supply to boiler Check power supply
Warnings
Warning
no. Warning Description Cause Solving
200 CC_LOSS_
COMMUNICATION Cascade System:
Managing cascade control
lost communication with
one of the depending. connection between
cascaded boilers is
interrupted or wiring
is broken Contact your
installer
202 APP_SELECTION_
ERROR Unknown appliance model
selected wrongly
programmed
parameters Contact your
installer
203 CC_LOSS_BOILER_
COMM Dual Cascade System:
Managing cascade control
lost communication with
one of the depending. connection between
cascaded boilers is
interrupted or wiring
is broken Contact your
installer
204 OUTDOOR_WRONG T_Outdoor sensor
measures open/shorted malfunctioning
outdoor sensor or
not connected or
wrong CH-mode
programmed Contact your
installer
205 T_SYSTEM_WRONG T_System sensor
measures open/shorted malfunctioning
system sensor or
not connected Contact your
installer
206 T_CASCADE_WRONG T_Cascade sensor
measures open/shorted
malfunctioning
cascade sensor or
not connected Contact your
installer
Table 5.3
Table 5.4