Slant/Fin VGH-100-CH, Руководство пользователя

Страница: 25 / 32

25
E95.1901EN032 User manual Slant Fin VGH-CH / CO
Blocking codes
If you cannot restart your boiler with the reset button, contact your installer.
Maintenance and repairs must be carried out by a certified technician/installer.
Blocking
code
Error Description Cause Solving
100 WD_ERROR_
RAM Internal software error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
101 WD_ERROR_
ROM Internal software error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
102 WD_ERROR_
STACK Internal software error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
103 WD_ERROR_
REGISTER Internal software error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
104 WD_ERROR_
XRL Internal software error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
105 HIGH_TEMP_
ERROR T_Supply sensor measures
over Stay_Burning_Temp
for a period of
Max_Value_Period. not enough
waterflow over heat
exchanger If the boiler does not start
after Reset, contact your
installer
106 REFHI_TOO_
HIGH Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
107 REFHI_TOO_
LOW Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
108 REFLO_TOO_
HIGH Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
109 REFLO_TOO_
LOW Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
110 REFHI2_TOO_
HIGH Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
111 REFHI2_TOO_
LOW Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
112 REFLO2_TOO_
HIGH Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
113 REFLO2_TOO_
LOW Internal hardware error wrongly
programmed BCU
or PB If the boiler does not start
after Reset, contact your
installer
114 FALSE_FLAME Flame is detected in a state
in which no flame is allowed
to be seen wrong earthing of
BCU and boiler If the boiler does not start
after Reset, contact your
installer
116 LOW_WATER_
PRESSURE_
SENSOR Low water pressure, occurs
when the pressure drops
below Minimal_Pressure, or
when the pressure drops
below 4.5 psi . not enough water
pressure fill up the system and
check if there are any
water leakages
WARNING