SL ZERO EDGE PRO, Руководство пользователя

Страница: 24 / 25

46
ZERO EDGE PRO
Screen Innovations LED IP Setup Instructions
Reset Instructions (Required to connect to a different Phillips Hue)
Before attempting to connect your LED IP to Phillips Hue, ensure that the Hue Bridge is powered on and connected to
the local WIFI network.
Note: The LED IP can be connected and controlled by only one Phillips Hue Bridge at a time
1. Begin by connecting the power supply to an electrical outlet. After a few seconds, the LEDs should power on to a
white color.
2. Open the Phillips Hue app on your smart device, and navigate to
Light Setup in the settings tab .
3. Press the Plus button in the lower right-hand corner, then press Search .
4. It can take several seconds to connect. Once connected, the LEDs will light green.
5. The LED IP will appear in the Phillips Hue app as
Extended Color light 1 and Dimmable light 1 . Only use Extended
Color Light 1 to control the LED’s. Dimmable Light 1 should be deleted.
6. After the LED IP is connected, it can be renamed and used like any Hue lamp.
1. Begin with the LED IP powered on
2. Turn off for a minimum of 2 seconds
3. Turn on and wait for LEDs to light
4. Repeat the off/on procedure a total of four times
5. At this point the LEDs will begin blinking for 10 seconds.
6. Once the LEDs stop blinking, repeat the off/on procedure two more times
7. At this point the LED IP will reset. Once complete, the LEDs will light a white color
4 x off/on
blinking 2 x off/on
reset starts
on for min. 2 seconds on for min. 2 seconds 10 seconds
on
off
IP CONTROLLED LIGHTING SETUP
Backlight IP Option Only
NOTES:
9715-B Burnet Road Suite 400, Austin,TX 78758
Tel: 512-832-6939 Fax: 512-832-6136
www.screeninnovations.com