SL ZERO EDGE PRO, Руководство пользователя

Страница: 10 / 25

ZERO EDGE PRO
19 18
ZERO EDGE PRO LED LIGHTS ATTACHMENT
1
Connect the lighting harness
with the included screws to
the nuts in the frame piece
with the lights attached to it.
NOTE: Steps 1 and 2 will have already been completed if possible to be shipped that way.
If so skip to step 3.
Plug in the lights to the
controller plugs.
2
If IP controlled LED lights are ordered, Phillips Hue hub must be purchased
and set up separately, see page 50 for IP lighting Instructions.
3
Cut the light strips at the copper pad as indicated to
the correct length such that they just overlap at the
middle of the top frame piece. DO NOT cut the light
strips at any other location.
+12V
B
G
R
+12VB
G
R
CUT HERE
Press in the lights to the channel on the frame. Do not crease the lights at the corners.