Engli
sh
22
SL AF StVZO
23
SL AF StVZO
Lamphead informations
Capacity indicator
Audible:
To check the capacity, simply press the touch-pad once. At first an audible signal will
sound to give a quick reading in 20% steps.
Visible:
The visible indicator uses 5 red LEDs. The LEDs can operate in two different operating
states: blinking and continuous. LED meanings:
A blinking LED is indicating a 10% step and a continuously glowing LED a 20% step.
Taillight:
To run the taillight simply
press the touch pad two times
and the 5 LEDs will operate continuously.
To switch off the taillight, simply press the pad again.
Moving light:
Press the touch pad three times
to activate the moving light. To switch it off
press the button another time.
Operation Smartcore battery
5 x
= 100 %
4 x
= 80%
3 x
= 60%
2 x
= 40%
1 x
= 20%
Example:
3 LEDs
steady glow
(20 %, 40 %, 60 %)
1 LED
blinking
(80 %)
= 70 % remaining capacity
Warning!
The lamp flashes several times. Stop immediately!
The light will be switched off.
1. Battery Warning, low capacity remaining.
High beam is activated.
High beam is activated.
Lamp lights up 1x:
Lamp lights up several times:
At the lamphead:
SL on the back of the lamp
lights up blue
At the remote:
The „high beam symbol“ of
the remote lights blue
Battery warning at the lamphead in operation:
Содержание Fernlicht StVZO
Страница 1: ...Fernlicht StVZO...
