Transmitter Operation Guide
·
When mounting the antenna, please carefully check if the antenna port matches the transmitter port,
do not connect it to power supply unless it is installed securely; otherwise, the transmitter may be
damaged due to wrong installation.
·
Be sure to install the transmitter in the place with good ventilation rather than a sealed space, or do not
wrap the transmitter tightly.
·
In use, do not touch the antenna and its metal components in order to avoid affecting the work of the
transmitter; in addition, touching the metal components of the antenna may have the risk of burning!
·
STX202 has two LEDs, which display channels in channel preset mode. In custom channel mode, the
left LED display TX1 band and channel while the right one display TX2 band and channel.
·
When powered on every time, the device will work in the preset channel mode. In such mode, you may
adjust channels via the buttons <CH-> and <CH+>. Totally, there are 4 channels available.
·
Long press the <CH-> or <CH+> button to enter the custom channel mode. In such mode, the 2 LEDs
will flicker and the device will enter firstly the band setup state. Respectively press the <CH-, CH+>
button to set the bands of TX1 and TX2 and press the <CH-,CH+> button again to respectively exit
from band setup mode and enter the normal working mode. In normal mode, you may press shortly the
<CH-> or <CH+> button to set channels. To switch custom channel mode to the preset channel mode,
press the <CH-> and <CH+> buttons at the same time.
·
In preset channel mode, you may connect one PWM channel of the receiver remotely controlled to the
S1 port of STX202 to control channels. On the remote controller, there is one 3-level switch with C-H for
c and C-L for channel-.
·
In custom channel mode, you may connect the other PWM channel of the receiver remotely controlled
to the S2 port of STX202. On the remote controller, there are two 3-level switches with S1 port to
control TX1 bands and channels, S2 port to control TX2 bands and channels, C-H to adjust bands and
C-L to adjust channels.
Содержание SKY02S
Страница 1: ...SKYZONE SKY02S 3D FPV GOGGLE USER MANUAL...
Страница 3: ...Function Diagram...
