18
Installation of the Unit
Stick coupler heat insulation (large and small) to the place where connecting pipes.
If the outdoor unit is installed lower than the indoor unit (See Fig.23)
If the outdoor unit is installed higher than the indoor unit (See Fig.24)
(1). A drain pipe should be above ground and the end of the pipe
does not dip into water. All pipes must be restrained to the wall
by saddles.
(2). Taping pipes must be done from bottom to top.
(3). All pipes are bound together by tape and restrained to wall by
saddles.
(1). Taping should be done from lower to the upper
part.
(2). All pipes are bound and taped together and also
should be trapped to prevent water from returning
to the room.
(3). Restraint all pipes to the wall with saddles.
Fig.23
Fig.24
Fig.22
6. Heat Insulation on the Pipe Joints (Indoor Side Only)
7. Liquid Pipe and Drain Pipe
Saddle
Sealed
Содержание SDVH12M-A1NBI/P
Страница 2: ......
