84
e o al Pro ed re
5HPRYHHOHFWULFER[
8. Remove evaporator
9. Remove motor press plate
A: Disconnect the indoor tube temperature
sensor.
B: Remove the screws at the joint of the earthing
wire and evaporator.
C: Loosen the clasp at the joint of the electric
ER[
A: Remove the screws at the joint of the
evaporator and rear case.
B: Adjust slightly the pipe on the evaporator to
separate the pipe with the evaporator.
C: Remove the evaporator to separate the
evaporator with rear case assy.
Motor press plate
Remove the screw of the motor press plate and
then remove the press plate.
(OHFWULFER[
Note
Procedure