15
Function and Control
Ɣ'XULQJRSHUDWLRQSRLQWWKHUHPRWHFRQWUROVLJQDOVHQGHUDWWKHUHFHLYLQJZLQGRZRQLQGRRUXQLW
Ɣ7KHGLVWDQFHEHWZHHQVLJQDOVHQGHUDQGUHFHLYLQJZLQGRZVKRXOGEHQRPRUHWKDQPDQGWKHUHVKRXOGEHQRREVWDFOHV
between them.
Ɣ6LJQDOPD\EHLQWHUIHUHGHDVLO\LQWKHURRPZKHUHWKHUHLVÀXRUHVFHQWODPSRUZLUHOHVVWHOHSKRQHUHPRWHFRQWUROOHUVKRXOGEH
close to indoor unit during operation.
Ɣ5HSODFHQHZEDWWHULHVRIWKHVDPHPRGHOZKHQUHSODFHPHQWLVUHTXLUHG
Ɣ:KHQ\RXGRQ¶WXVHUHPRWHFRQWUROOHUIRUDORQJWLPHSOHDVHWDNHRXWWKHEDWWHULHV
Ɣ,IWKHGLVSOD\RQUHPRWHFRQWUROOHULVIX]]\RUWKHUH¶VQRGLVSOD\SOHDVHUHSODFHEDWWHULHV
NOTE:
Replacement of Batteries
3UHVVWKHEDFNVLGHRIUHPRWHFRQWUROOHUPDUNHGZLWKDVVKRZQLQWKH¿JDQGWKHQSXVKRXWWKHFRYHURIEDWWHU\ER[
along the arrow direction.
2. Installation two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar are correct.
5HLQVWDOOWKHFRYHURIEDWWHU\ER[
Setting the dehumidifying mode with 30 degree after the unit is powered on within 60s.And then press "LIGHT"
Į
"SLEEP"
Į
"LIGHT"
Į
"SLEEP",it could change the memory to not memory function.The light blink and show the error code 3s.
Memory setting
3UHVVOLJKWDQGEXWWRQWRJHWKHUIRUV,WFRXOGHQWHURUH[LWWKLVIXQFWLRQ,WZLOOVKRZWKHHUURUFRGHZKHQWKLVIXQFWLRQLVRQ
'LVSOD\E\UHPRWHFRQWUROOHU
3UHVVWKH)$1DQG02'(VDWWKHVDPHWLPHLQKHDWLQJPRGHLWZLOOHQWHURUH[LWWKH
manually defrost.Remote controller will
display "dF" 5s,and it will show the setting temperature after 5s.
Manually defrost
Repowered within 5mins, set 16 degree under cooling mode, then press the "TURBO" button 6 times within 3s, will enter this
function.
Collecting freon
In the heating mode, press "SLEEP" and "TURBO" buttons together for 3s would start or cancel the Timing defrost.
Timing defrost
The minimum cooling temperature setting
In the off mode,pressing "TEMP"and "-" button at the same time,the LCD will display the minimum cooling temperature.The
default temperature is 16°C and you can adjust the temperature with "+" or "-" from 16°C to 31°C, 3 seconds later it will return to
the standby mode.
,QWKHRIIPRGHSUHVVLQJ7(03DQGEXWWRQDWWKHVDPHWLPHWKH/&'ZLOOGLVSOD\WKHPD[LPXPKHDWLQJWHPSHUDWXUH7KH
default temperature is 31°C and you can modulate the temperature with "+" or "-" from 16°C to 31°C, 3 seconds later it will
return to the standby mode.
Ɣ,QKHDWLQJPRGHSUHVVLQJ0RGHDQGEXWWRQDWWKHVDPHWLPHZLOOHQWHUH[LWWKHORZWHPSHUDWXUHKHDWLQJIXQFWLRQ
Ɣ/$ZRXOGEHVKRZHGRQWKHUHPRWHFRQWUROOHUDIWHUHQWHUHGLQWRWKHORZWHPSHUDWXUHKHDWLQJIXQWLRQ
Ɣ:KHQVZLWFKLQJIURPRQHPRGHWRDQRWKHUPRGHORZWHPSHUDWXUHKHDWLQJIXQFWLRQZDVFDQFHOHG7XUQRIIDQGWKHQWXUQRQ
air conditioner that will remain the low temperature heating function. After powered on, the low temperature heating mode was
default to off status.
Ɣ,QWKHORZWHPSHUDWXUHKHDWLQJPRGH6/((3DQG/RZWHPSHUDWXUHKHDWLQJIXQFWLRQFDQQRWVWDUWDWVDPHWLPH:KHQORZ
temperature heating mode has already started, meanwhile you press the "SLEEP
EXWWRQWKHDLUFRQGLWLRQHUZLOOH[LWORZ
temperature heating mode and enter the sleep mode. Vice versa.
Note:
1. In the low temperature heating mode, the fan speed was default to Auto and non-ajusatable.
2. In the low temperature heating mode, "TURBO" and "QUIET" can't be set. If enter the low temperature heating mode, the turbo
DQGTXLHWIXQFWLRQWKDWVWDUWHGEHIRUHZLOOEHFDQFHOHG$VZHOODVZKHQH[LWWKHORZWHPSHUDWXUHKHDWLQJPRGHLWZLOOQRWUHVXPH
:KHQH[LWIURPWKHORZWHPSHUDWXUHKHDWLQJPRGHWKHVSHHGDQGWHPSHUDWXUHZLOOWXUQLQWRWKHRULJLQDOFRQGLWLRQEHIRUHLWVWDUWHG
4. You can set up other function.
The maximum heating temperature setting
Low temperature heating function setting
