11
Function and Control
● Press this button to start or cancel clean function.
● It is unable to set clean function when the unit is on; if the air conditioner runs in cool or dry mode before turning off, press
"CLEAN" button and show " " then the clean function is on; press "CLEAN" button again, " " disappeared, then the clean
function is off, or running 10 mins in clean function then turn off automatically.
● In the first power on, the clean function is off acquiescently.
● The clean function can not be set and displayed when the air conditioner is in auto, fan and heat mode before turn off.
CLEAN button
+ and - button
Press "+" or "-" button once to increase or decrease 1°C of set temperature. Holding "+" or "-" button, set temperature on remote
controller will change quickly. On releasing button after setting is finished, temperature indicator on indoor unit will change
accordingly. (Temperature can’t be adjusted under auto mode)
● When setting TIMER ON, TIMER OFF or CLOCK, press "+" or "-" button to adjust time (Refer to CLOCK, TIMER ON, TIMER
OFF buttons).
TURBO button
Press this button to turn on or turn off the TURBO function in cool,heat,fan mode.
Note:
● Press "QUIET" or "FAN" button the unit will quit this function.
● This function is no use in auto mode or dry mode.
●
When selecting "
" with remote controller, it’s auto swing. left&right swing louver of air conditioner will swing left&right
automatically at the maximum angle.
●
When selecting " , , , , ,
" with remote controller,it's the fixed position swing.
Left&right swing louver of air
conditioner will stop at that position as shown by the icon to swing.
●
When selecting "
", it’s the circulating swing. Left&right swing louver of air conditioner will swing circularly according to the
angle as shown by the icon.
Note:
There is no this function for the units. If press this button, the main unit will sound, but it also runs under original status.
HEALTH button
Press this button to turn on or turn off the health function.
Note: This function is not available for some models.
SLEEP button
Press this button to turn on or turn off the SLEEP function under cool,heat ,dry mode.
Note:
● This function is off as defaulted after power on.
● It will be cleared after changing mode.
● It is no use under "FAN" mode and "AUTO" mode.
I FEEL button
Press this button to start I FEEL function and " " will be displayed on the remote controller. After this function is set, the remote
controller will send the detected ambient temperature to the indoor unit and the unit will automatically adjust the indoor temperature
according to the detected temperature. Press this button again to close I FEEL function and " " will disappear.
Note:
Please put the remote controller near user and confirm the unit can receive the remote code when this function is set. Do not put the
remote controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature.
CLOCK button
Press this button to set clock time. " "and "
" icon on remote controller will blink. Press "+" or "-" button within 5s to set
clock time. Each pressing of "+" or "-" button, clock time will increase or decrease 1 hour. Press this button again, " " and "
" icon on remote controller will blink. Press "+" or "-" button within 5s to set clock time. Press this button another time, "
" and "
" icon on remote controller will blink. Press "+" or "-" button within 5s to set clock time. If hold "+" or "-" button, clock
time will change quickly. Release when reaching your required time. Press "CLOCK " button to confirm the time, "
" icon stops
blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can’t exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER
ON/TIMER OFF is the same.
