29
Safety Notifications (Please Must Follow)
In order to prevent the harm or damage to the user or the person and
property of others, please make sure to follow the safety issues.
Warnings
The risk of electric shock.
1
.
Please use 220v, above 10A with
ground wire dedicated socket.
2
.
When inserting and pulling out the
power cord please use the plug, please.
Don't use the damaged power cord.
When the power cord pin is dirty please
wipe clean with dry cloth in time.
3
.
Do not use the wet hand to insert or
pull out the plug.
4
.
Please pull out the plug when finishing,
repairing or cleaning.
The danger of fire and current leakage
1
.
Do not allow the washing machine
close to the fire, or lighted cigarettes,
candles and volatile materials.
2
.
Please do not sprinkle the water on
the control panel of washing machine.
3
.
Please do not put the washing
machine in the place of wet and outside
place.
4
.
Please fix the drain pump and make
sure the sewer unobstructed.
The danger of high temperature
1
.
When washing in high temperature,
the door glass will be heating. Please do
not touch the door glass, especially
Children.
2
.
When opening the door after high
temperature washing, please wait for the
temperature cooled down to a safe level
and the door will unlocked automatically.
The danger of getting hurt
1
.
Please handle the carton box after
removing, don't let the children touch or
eat.
2
.
Do not allow the children to operate or
climb up to the washing machine.
3
.
Please close the door after use to
avoid the children enter into the drum.
The danger of injury
1
.
Do not put any heavy things on the
top of the washing machine.
2
.
If you want to move the machine,
please remember ask for help.
3.Please do not ask unprofessional
people to repair the machine.
The danger of damage the cloths
1
.
Please do not wash the cloths which
is waterproof, like Raincoat, feather
products, sleeping bags
2
.
Please wash the cloths which can be
washed, if you have any doubt, please
following the instructions.
The danger of explosion
1
.
Please do not washing the cloths which
stained with kerosene, gasoline, thinner,
inflammable goods.
2
.
Please do not washing when gas leakage.
If
want
to
open
the
door
when
the
machine
running
or
other
circumstances
,
please
check
the
water
level
in
the
drum
first
in
order
to
avoid
the
water
overflow
tand
cause
unnecessary
loss
.
2
solutions
Phenomenon
check points
Washer can't start
Spinning screen
shows “UE”
Check if press the power button or
start/pause button?
Is the plug pulling out?
Is there a power failure?
Check if cut the leakage protector?
Check if disassemble the carriage bolt?
Is the machine placed steadily?
Are the clothes too small or light?
Are the locknuts on under the feet
tightened up?
Check if turn the tap off?
Is the water supply cut off or the water
pressure too low?
Are the water inlet pipes frozen?
Are the filters blocked?
Are the outlet pipe placed too highly?
Are the outlet pipes frozen?
Are the outlet pipes blocked?
Are the floor drain blocked?
Make sure if start the washer without
closing the door well.
Please pull out the plug and call for the after sale service
Press the power button or start/
pause button.
Connect the plug.
Please wait.
Open the leakage protector.
Disassemble the carriage bolt.
Place the machine on a steady ground.
Add more clothes.
Tighten up the locknuts.
Open the stopcock.
Please wait.
Use hot water to unfreeze the pipes.
Take out the filters and clean them.
Please put away the outlet pipes
and make sure the height within 1M.
Use hot water to unfreeze the pipes.
Take out the foreign matter and
dredge the pipes.
Clean the floor drain.
Make sure the door truly closed
Water inflow
screen shows “IE”
Water outflow
screen shows “OE”
Door trouble
screen shows “DE”
The wash drum does
not running, screen
shows “LE” or “CE”
Model:
F651003S\F751203N
Troubleshooting guide
Please pull out the plug and call for the after sale service
“
”
EE
Not heating,
screen shows
If adding the amount of detergent is more
than the suggested?
If use the low bubble detergent which is
especially for front loading washing
machine?
Add proper amount of detergent.
Use the correct type of detergent.
Too much bubble
If the position sensor motor fall off or not? To firmly connect the sensor and
motor stator
The fault of motor
sensor, the screen
shows “HE”
If the water level sensor has fallen off
or not?
If the water level sensor pipe blocked or
there is a big pressure?
Tighten the sensor. Open the water
pipe excluded congestion or pressure
The fault of water
level sensor, the
screen
shows “PE”
Power off then power on, push the
“power” button, the screen display
“PF” to indicate that the power has
powered off before. The machine can
be in normal operation.
To push the button of” Start/Pause”
can continue the operations before
power off. And the other operations
can be processed.
Power off, the screen
shows “PF”
Due to the abnormal of water inlet valve
and water level sensor
Shut the water tap, pull out the plug
and call for the after sale service
Keep water inletting
without stop, screen
shows “FE”
