Skyworks SKY66430-11 Скачать руководство пользователя страница 8

Страница: 8 / 15

SKY66430-11 / SQN66430-11 SiP • Evaluation Board User Manual V1.2

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

September 2, 2020 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 205375C

5.0 Supported Operators

EVB is provided with a SIM card - In order to check the supported operators, please refer to the Truphone web site.

5.1 List of Supported Operators

The list of the operators is predefined in the software and automatically configured when inserting their SIM card is presented in

Connecting the Board to a Network on page 9

The modem can support up to 18 LTE bands. Scanning all the bands takes several minutes. In order to reduce the scanning duration, it is
possible to configure the list of bands that need to be scanned with the AT+SQNBANDSEL command.

Содержание SKY66430-11
















Результаты поиска

Содержание SKY66430-11

Отзывы:

Похожие инструкции для SKY66430-11

Бренды по названию

Популярные бренды

Skyworks SKY66430-11, Руководство пользователя

Результаты поиска

Содержание SKY66430-11

Отзывы:

Похожие инструкции для SKY66430-11

Бренды по названию

Популярные бренды