SkyWave IDP 700 Series, Руководство по оборудованию

Страница: 48 / 70

IDP 700 Terminal Series - Hardware Guide
T206, Version 01 36 © SkyWave Proprietary
4.7.2 Adhesive Mount
The remote antenna may also be mounted using adhesive or a high strength outdoor grade
silicone when mounting holes are not an option in the mounting surface.
Refer to the adhesive manufacturer's recommendations for application temperature,
application conditions, compatible bonding materials, and minimum curing times when
working with an adhesive. Failure to follow the manufacturer's guidelines could result in
the remote antenna separating from the mounting surface.
CAUTION Adhesive or silicone cannot block the
air vent features shown
in Figure 37.
Figure 37 Air Vent Feature
4.7.2.1 Silicone Side Connector Mount
The following tools and materials are required if mounting a side cabled remote antenna
with silicone.

Outdoor rated silicone adhesive sealant (GE RTV 108)

Isopropyl alcohol or an equivalent
To mount the antenna:
1. Find a location for the remote antenna following the guidelines provided in
Section 4.4.1.
2. Clean the asset surface with isopropyl alcohol or an equivalent product that does
not leave a residue.
3. Apply silicone around the hole in the asset and to the bottom surface of the
remote antenna and position onto the assets surface.
4. Apply a generous bead of silicone around the entire perimeter of the remote
antenna enclosure. The two vertical slots shown in Figure 38 are vent features
and must not be filled with silicone.
Do Not Block These Features