6
. Tie the straps that are sewn on the edge of the enclos-
ure mesh around the outside of the cap. Make sure to
secure the knot tightly, see insert drawing A..
Note: The enclosure poles are high, be careful when
you attach the straps. If needed, please use a ladder.
5.
5.
6.
Note:
In Step 5 you will secure the enclosure poles
to the frame of the trampoline.
Start from the enclosure door, lift one of the poles assembled
in Step 1, see the insert drawing. Insert the Straight Tube(5)
through frame pad into the top hole of the Square Socket on
trampoline frame as shown.
Make sure the bent side of the
enclosure poles are facing toward the center of the tram-
poline.
Note:
The end of the straight tubes(5) are sharp. Use
caution when assembling.
Repeat this process to assemble the remaining seven poles
to the trampoline frame.
Strap
1
A
Strap
Inset drawing
5
Leg
Socket
Jump Mat
Frame Pad
20
