19
5
. Tie the straps that are sewn on the edge of the enclos-
ure mesh around the outside of the cap. Make sure to
secure the knot tightly, see insert drawing A..
Note: The enclosure poles are high, be careful when
you attach the straps. If needed, please use a ladder.
6
5.
Note:
In Step 6 you will secure the enclosure poles
to the frame of the trampoline.
Start from the enclosure door, lift one of the poles assembled
in Step 1, see the insert drawing. Insert the Straight Tube(5)
into the top hole of the Square Socket on trampoline frame
as shown.
Make sure the bent side of the enclosure poles
are facing toward the center of the trampoline.
Note:
The end of the straight tubes(5) are sharp. Use
caution when assembling.
Repeat this process to assemble the remaining five poles
to the trampoline frame.
Strap
6
1
A
Strap
1
Enclosure
Door
Poles
Pad
Inset drawing
5
Leg
Leg
Socket
Jump Mat
Frame Pad
T -joint
6
7
7
. Insert the end cap(3) into the bottom hole of the Socket.
Insert end cap(3) into end of Socket
3
socket
DISASSEMBLY (TAKING THE ENCLOSURE APART)
To disassemble the trampoline enclosure (take it apart),
follow assembly steps 1 through 7 in reverse order.
8.
Your trampoline enclosure is now fully assembled
(put together).
Make sure that all parts are securely
attached. Familiarize yourself and all users with the
trampoline and enclosure with the safety precautions,
use and instructional materials, and care and mainte-
nance instructions in this manual before using the
trampoline and enclosure.
