Make Things Easier for Yourself!
This manual is designed to ensure that the Skybed can be assembled successfully by anyone
Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instruction:
*
The assembly requires at least two people.
* For help indentifying parts, use the PART IDENTIFICATION CHART on page 5 and 6, and the
PART LIST on page 7 and EXPLODED DRAWING on page
8
.
* Place all parts in a cleared area and remove all packaging materials. Do not dispose of the
packaging materials until assembly is completed.
* Tighten all parts as you assemble them, unless instructed to do otherwise.
9
ASSEMBLY
1. Attach the Upper Pole (2) to the Top Joint (1)
with M10X85 Hex Bolt ( 17 ), two M10 Curved
Washers (18) and M10 Nut (19).
Attached the other three Upper Poles (2) to the
Top Joint (1) with three M10X85 Hex Bolts (17),
six M10 Curved Washers (18) and three M10
Nuts (19) in the same way.
2. Attach the D10mm Conection Ring (16) to the
Top Joint (1) as shown, then tighten the Nut of
D10mm Connection Ring (16) .
1
2
2
2
2
17
18 18
19
1
17
18
18
19
1
16
