Do not use the trampoline without the Frame Pad (6).
The Frame Pad is designed to reduce the possibility of
injuries due to jumpers coming in contact with the tram-
poline frame. If you do not have a Frame Pad, contact
your dealer to obtain one. Properly install the Frame Pad
before using the trampoline.
7. Look under the trampoline and locate the straps and
sleeves attached to the underside of the Frame Pad.
Position each outer strap so that one strap is on each side
of the frame as shown. Position each sleeve above a
spring. Disconnect the spring and slide it through the
sleeve. Then reattach the spring to the mat as shown
Repeat this with the remaining sleeves (not shown).
Refer to the inset drawing. Hold one of the straps. Wrap
the longer strap under the frame and then thread the strap
through the buckle on the shorter strap as shown. Pull the
end of the longer strap to tighten straps. Do not overtight-
en the straps. Leave 1/4 inch gap.
Repeat this step with the remaining straps (not shown).
8. Using the included plastic tie, attach the Safety Placard
(9) to the frame near the point where jumpers will climb
onto and off the trampoline.
9. Attach the Accessories Bag (10) to the Frame
in the same manner as you attached the frame pad. For
increased saftey, postion the Accessories Bag (10) at least
four feet away from the enclosure opening.
The trampoline is now fully assembled. Make sure that
all parts are securely attached. Familiarize yourself and
all users of the trampoline with the safety precautions,
use and instructional materials, and care and maintenance
instructions in this manual before using the trampoline.
14
10
Straps
Sleeve
Frame
Frame
9
Longer Strap
Buckle
DISASSEMBLY (TAKING APART)
To disassemble (take apart) the trampoline, follow assembly steps 1 through 9 in reverse order. Do not attempt to
disassemble any frame parts before the springs and the mat have been removed. Use gloves to protect your hands
from pinch points while taking the trampoline apart.
10
6
Accessories Bag
