SKYTRONIC I5-PT, Руководство по установке

Страница: 8 / 36

Page 6
I5 INSTALL ● REV0
1-1. General Specifications
Weight: 800 lbs. (363 Kg)
Dimensions: 35.5”W x 33”D x 79”H
(900 x 840 x 2000 mm)*
*All dimensions refer to finished floor and finished
wall.
- Packaged Unit Dimensions & Weight
• Size: 40"W x 30"D x 40"H
• Weight: 460 lbs.
- Package Contents
• Unit
• Drain Plumbing package
• Header Rack
• I-Series Performance Kit
For the connection of the SKYTRON I5 Washer-
Disinfector to the facility water supply, all local/
national regulations must be followed.
Install all the electrical connections in accordance with
the NEC standards and local/national regulations.
1-2. Utility Connection Specifications
It is recommended that water shut-off valves and
vacuum breakers (by others) be installed on all
service lines. Flexible hoses are provided for service
connections. Hoses extend approximately 5 feet
from the top of the machine.
- Waterline connection color code:
• Red: HW (hot water)
• Blue: CW (cold water)
• Yellow: DI (de-ionized water)
- Cold Water (CW)
• Connection: ¾” NPT
• Flow pressure: 29-75 P.S.I. (2-5 bar)
• Capacity:
5 gal./min.
- Hot Water (HW)
• Connector: ¾” NPT
• Flow pressure: 29-75 P.S.I. (2-5 bar)
• Capacity:
5 gal./min.
- De-Ionized Water (DI)
• Connector: ¾” NPT
• Flow pressure: 29-75 P.S.I. (2-5 bar)
• Capacity:
5 gal./min.
NOTE
SKYTRON also recommends Reverse
Osmosis (RO) water or water from a
filtered source.
- Compressed Air (AIR) (steam unit only)
• Connector: 3/8” Poly
• Flow pressure: 58-145 P.S.I. (4-10 bar)
• Capacity:
2.6 gal./min. (10L/min.)
• Quality: Oil free, filtered
- Steam (S) (steam unit only)
• Connector: ¾” NPT
• Capacity: 2 lbs./min. (1Kg/min.)
• Consumption per cycle: 13-22 lbs. (6-10 Kg)
- Drain Service
SKYTRON stipulates that the customer provide a
minimum 12” x 12” x 12” (or equivalent) floor sink
with a minimum 3” outlet. SKYTRON recommends
that the floor sink be located within the Washer base
footprint. The SKYTRON I5 Washer-Disinfector is
supplied with Drain Hoses that extend three (3) feet
from the bottom of the Washer. The Drain Hoses
should extend into the floor sink for proper draining.
• Capacity: 7.92 gal./min.
• 12” x 12” x 12” floor sink with minimum 3”
gravity fed (by others)
- Electrical Connection (EL)
• 208VAC, 3Ph, L1+L2+L3+G
- Power consumption
• Steam dryer and sump: 25 Amp., 9KW
• Electric dryer and sump: 50 Amp., 16KW
SECTION I TECHNICAL SPECIFICATIONS / CONNECTIONS