SKYTRONIC I5-PT, Руководство по установке

Страница: 22 / 36

Page 20
I5 INSTALL ● REV0
Step 8
Press the RIGHT ARROW key two time to enter
the Dryer Turbine 1 menu.
Verify the operation of the Turbine Motor by pressing
the START key quickly two times to turn the motor
ON and then OFF.
Step 9
Press the RIGHT ARROW one time to enter the
Dryer Turbine 2 menu.
Verify the operation of the Turbine Motor by pressing
the START key quickly two times to turn the motor
ON and then OFF.
Step 10
Press the RIGHT ARROW key two times to
enter the Chemical Pump 1 menu.
Verify the operation of Chemical Pump 1 by pressing
the START key quickly two times to turn the pump
ON and then OFF.
Step 11
Press the RIGHT ARROW key one time to
enter the Chemical Pump 2 menu.
Step 5
Press the START key quickly two times to turn
the pump ON and then OFF.
NOTE
Watch the pump shaft until it slows down
to determine the direction of its rotation.
If it is not rotating in the correct direction,
instruct the installation electrician to
change the electrical connections to
correct the phase problem.
Step 6
Press the RIGHT ARROW one time to enter the
Small Circulation Pump menu.
Verify this pump operation by pressing the START
key quickly two times to turn the pump ON and
then OFF.
Step 7
Press the RIGHT ARROW key two times to
enter the Drain Valve menu.
Verify the operation of the Drain Valve by pressing
the START key quickly two times to OPEN then
CLOSE the valve.