1
RJ-45/10-100 Base T
2
DC5V: 5V/2A power supply
3
RESET BUTTON: press and hold the RESET button for 5 seconds and the IP camera comes back in the factory default
setting.
1.4 PC system requirements
System configuration requirements: (e.g. to the IP Camera view)
CPU: 2.06 GHZ or higher memory: 256 m or higher
Network card: 10 m or higher Display Card: 64 m or higher
Recommended operating system: Windows2000 or Windows XP
1.5 Hardware Instruction
Use the following steps to set your camera hardware. Make sure you do every step carefully.
1) Plug the network cable into the camera and into your DSL router.
2) Plug the adapter into the camera and then into the wall outlet.
Note: use only the power adapter that came with the camera malfunction.
3) The camera has about 30 seconds to boot up before an IP address appears (details: 2.1).
4) The head will now spin around at a proper connection and the network Indicator LED will blink.
1.6 Software installation
The Software installation is the key to a successful use of this product.
1
Open the CD, look for the software.
2
Double click IPCamSetup. exe and install the software.
Fig 1.4 3
Fig 1.4 3 only click Next, the software installation is completed.
