Fig 2.19
3 HOW to USE
3.1 step by step:
After the proper installation is the IP camera is switched on, the head turns itself around and stops in the middle.
1) Use a network cable to connect the IP Camera with LAN to connect.
2) Go to "IP Camera Tool" to the basic configuration to do.(details: 2.1)
3) When the IP address of the camera in traffic of the "IP Camera Tool", the basic configuration is completed.
4) Put the "safety property" of IE in the PC when you are watching it for the first time.
5) Camera login (details: 2.2)
6) Now you can use the IP Camera as Visitor, Operator, or Administration in the LAN.
3.2 setting up Wi-Fi IP Camera
1) to the wireless functions of the IP Camera to use a wireless router like linksys needed. 2) go to the
wireless router-setup page (look in the router manual) to go to SSID, Channel, Security Way (NONE,
WEP), Authentication Type, Encryption to look.
3) Go to "Wireless Lan Settings" to set the content in that of the wireless router is obtained, then click on "Submit" to reboot
(restart) the appliance.
Note: the unit supports WEP and WAP Security Encryption.
