GB
Congratulations to the purchase of this SkyTronic Video Doorphone Intercom System. Please read the
manual thoroughly prior to installing the unit.
Warnings
-
Keep the unit away from strong magnetic sources such as TV sets that might cause interferences.
-
Unplug the unit from the mains if it is not used for a longer period of time.
-
Keep away from water and other liquids that might damage the unit and cause a shock hazard.
-
Do not connect too many leads to the same outlet. This might cause interferences and fire.
-
If the unit is damaged to an extent that you can see internal parts, do not plug it into a mains
outlet.
-
Do not open the unit yourself. Repairs should only be carried out by qualified staff.
-
Do not drop the unit and do not hit it with heavy objects.
-
Do not install the unit near ammoniac, acid materials and toxic gases. These might damage the
unit.
-
Do not install the unit near direct sunlight or heat sources.
-
If a problem occurs, please contact your dealer.
-
Check the mounting area if it is free from other cables that might be damaged.
-
The unit doesn’t contain any user replaceable parts.
-
During installation and maintenance, the unit must be unplugged from the mains.
-
Prior to using the unit, have it checked by a qualified person.
General Description
This system is designed to identify the person who rings the door bell. When the door bell rings,
remove the handset and you can see on the CRT display who is standing in front of your door. You
can speak to the person outside. Put the handset back once you have finished your conversation. If
your model is fitted with the optional door opener, press the button ‘door release’ on the monitor. The
door will be opened automatically.
Contents of the packaging
-
Monitor
-
Telephone
handset
-
Camera
-
Mounting bracket (monitor)
-
Telephone
lead
-
Mounting bracket (camera)
-
Adapter (230Vac – 13,5Vdc)
-
Mounting
screws
-
Manual
Installation
Monitor (see fig.1 for use with flush mount box or fig. 2 for use on a wooden wall): Screw the mounting
bracket on the inside wall at the ideal mounting height which is about 150cm above ground. Fasten
the monitor onto the bracket and connect it to the camera (see wiring diagram). Make sure that it is not
too far away from a mains outlet.
Camera (see fig. 3):
Screw the mounting bracket to the outside wall at the ideal mounting height which is approx. 145cm
above ground (see fig. 4). Hang the camera onto the bracket.. Note: Make sure that the camera lens is
not exposed to direct sunlight.
