GB
Congratulations to the purchase of this active subwoofer.
Please read this manual prior to using the unit.
SAFETY RECOMMENDATIONS:
-
Please read this manual prior to using the unit.
-
Keep the manual for further reference.
-
Keep the original packaging to ensure safe transport of the unit.
-
For indoor use only.
-
Place the subwoofer on a flat and stable surface.
-
Prior to the first use, have the unit checked by a qualified person.
-
The unit contains voltage carrying parts. DO NOT open it.
-
When you unplug the unit from the mains always pull the plug, never the lead.
-
Never plug or unplug the unit with wet hands.
-
If the plug or mains lead are damaged, they need to be repaired by a qualified technician.
-
If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet.
-
Any installation, operation and maintenance of this device should be carried out by a qualified person.
-
Plug the unit only to a 230Vac/50Hz earthed mains outlet.
-
Do not place the subwoofer near heat sources.
-
Keep away from water and other liquids.
-
Always unplug the unit during a thunderstorm or when it is not in use.
-
If the unit has not been used for a longer period of time, condensation can occur inside
-
Set all volume controls to zero prior to switching the unit on.
-
Set the volume gradually. Quick variations can damage the speakers.
-
Switch the subwoofer on at last and off at first.
-
Do not use cleaning sprays for the controls. The residues cause dust deposits in the controls.
-
Do not wind up the signal cables with the power leads. This may cause interferences.
Installation and operation
Rear side of the subwoofer
1. On/Off
switch
2.
On/Off LED indicator
3. Input
L+R
4. Output
L+R
5. Gain
control
6. Filter
control
7. Mains
socket
NOTE.
Prior to connecting the subwoofer to an amplifier or any other equipment, make sure that your subwoofer is NOT
connected to the mains and NOT switched on.
Connect the input (3) (L+R) to your amplifier via RCA leads. You also have the option to connect the output (4) (L+R) of your
subwoofer to another active subwoofer or active speaker via RCA leads. Once all connections have been done, you can
connect the subwoofer to the mains by plugging the mains lead into the mains socket (7) on the subwoofer and into a mains
outlet. Press the On/Off button (1). The power LED (2) lights up.
Set the volume with the GAIN control (5) and the crossover frequency with the Filter control (6)
Specifications
Power supply: ...................................................................................................................230 VAC / 50 Hz
Magnet weight: ..................................................................................................................................30 Oz
Impedance: .......................................................................................................................................8 Ohm
Power: .............................................................................................................................................. 100 W
Frequency range: ............................................................................................................... 40 Hz - 250 Hz
Dimensions (lxwxh): ...................................................................................................320 x 270 x 380 mm
Weight: ............................................................................................................................................12,9 kg
•
Specifications and design subject to changes without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in
this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This
is also applicable to all damages in whatever form.
