Skytech 5320 Скачать руководство пользователя страница 2

Страница: 2 / 12

Skytech: 5320

REV. 7-25-18 Page 2

ROOM

SET

TIMER

ONOFF

OFF

THERMO

LCD DISPLAY SCREEN

1. BATTERY ICON

- Battery power is low. Replace batteries within two

weeks.

2. TIMER

- Indicates time remaining before system shuts OFF, when timer-

programmed; 9-hour maximum setting.

3. MODE

- Indicates operation MODE of system. ON indicates the system is

ON, either manually or thermostatically. OFF indicates the entire system

is turned OFF THERMO indicates the system will automatically cycle ON/

OFF, depending on programmed

4. SET

- Indicates desire SET room temperature for THERMO operation

5. FLAME

– Indicates burner/valve in operation.

6. CLOCK

– Indicates the current time in AM/PM

7. ROOM

– Indicates CURRENT room temperature.

8. ° F

indicates degrees Fahrenheit (ºC indicates degrees Celsius).

9. LOCK

– Child lock out.

OPERATION FUNCTIONS

Note:

Touch anyplace on the screen and the screens blue

back light will light up and stay on 5-seconds.

To operate the system, press the MODE/SET button or

press the MODE SECTION on the LCD screen on the front

of the transmitter to select the operational MODE desired.

• ON indicates the system is ON, either manually, timed

or thermostatically.

• THERMO indicates the system will automatically cycle

ON/OFF, depending on programmed set temperature.

• OFF indicates the entire system is turned OFF.

ROOM

SET

TIMER

OFF

MODE/SET

Mode/Set Button

NOTE:

When setting the clock the transmitter must be in the OFF position

1. Press the word TIMER on the LCD screen of the transmitter for more

than two seconds. The hour digit(s) will begin flashing.

2. Press the UP or DOWN buttons until the desired hour is displayed in

AM or PM.

3. After setting the desired hour, press and release the word TIMER

again and the minutes digits will begin flashing.

4. Press the UP or DOWN buttons until the desired minutes are

displayed.

5. Press the word TIMER again for more than two seconds then release.

The minute digits will cease flashing, indicating the clock has been

successfully set.

SETTING THE CLOCK

ROOM

SET

TIMER

OFF

MODE/SET

NOTE

: Flashing numbers on the display indicate the system is awaiting user input, such as using the UP and DOWN

buttons to program a new setting. If no change is made to flashing digits within 15 seconds, the system will complete the

procedure last programmed and reset the display to its normal state.

Содержание 5320













Результаты поиска

Содержание 5320

Отзывы:

Похожие инструкции для 5320

Бренды по названию

Популярные бренды

Skytech 5320, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 5320

Отзывы:

Похожие инструкции для 5320

Бренды по названию

Популярные бренды