REV 8-14-17 Page 15
Skytech: 3002P
QUICK PROGRAMMABLE GUIDE
FOR SKYTECH 3002P PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the SKYTECH programmable transmitter.
For detailed instructions for each feature and function, see OWNER”S MANUAL.
Built -in
Factory
Program
Period
Time/Temp
ON
Time
OFF
All 7 Days
Morn
6:00AM / 70° 8:30AM
Day
8:30AM / 60° 3:00PM
Eve
3:00PM / 70° 11:00PM
Night
11:00PM / 63° 6:00AM
Built-in Factory Program
The transmitter has a built-in factory program, (7) days a week with (4) continuous time periods for each day. Each time
period has it’s own starting time and temperature. A chart of the built-in programs is shown below.
NOTE
: The ending
time for one period is the starting time for the next period.
SHORT CUT PROGRAMMING
1. Press
PROG
button for more than 4-seconds. The words
START
and
FOR
on the LCD will begin blinking.
2. Program DAY OF WEEK and PERIOD OF DAY by
pressing
AHEAD
and
BACK
buttons.
3. Again, press
PROG
button. START TIME will begin
blinking. Program START TIME by pressing
UP
or
DOWN
button.
4. Again, press
PROG
button. SET TEMP will begin to blink.
Program SET TEMP by pressing
UP
or
DOWN
buttons.
5. Again, press
PROG
button. The next DAY OF WEEK and PERIOD OF DAY will begin
to blink.
6. Repeat steps 2 through 5 for all 7 DAYS until each PERIOD OF DAY is programmed.
When all programmed settings are complete, press the
SET
to lock in new programs.
To REVIEW, either FACTORY or USER programs, push the
PROG
button for
1-second
; then scroll through each DAY
and PERIOD OF DAY by pressing PROG button, allowing
1-second
between each press of this button. Press the
SET
button when finished reviewing the programmed times and temperatures.
To CANCEL user-customized programming, press and hold
PROG
and
SET
buttons together, for 10-seconds; all
USER programs will be cancelled and the FACTORY program will return.
NOTE:
Push
AHEAD
or
BACK
buttons to advance day and period should you not want to change each SET time or
SET temperature.
PERIOD
MORN
DAY
EVE
NIGHT
TIME TEMP
TIME TEMP TIME TEMP
TIME TEMP
S
(Sunday)
M
(Monday)
T
(Tuesday)
W
(Wednesday)
T
(Thursday)
F
(Friday)
S
(Saturday)
BLANK TABLE TO RECORD CUSTOM PROGRAMMING
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
