Skytec 151.557 Triton, Инструкция по эксплуатации

Страница: 6 / 26

6
DMX Terminator
At the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents
electrical noise from disturbing and corrupting the DMX control signals. The DMX terminator is simply an XLR
connector with a 120 Ohm resistor connected across pins 2 and 3, which is then plugged into the output socket
on the last projector in the chain. The connections are illustrated below.
Set Up:
PAN Reverse
With this function you can reverse the Pan-movement.
TILT Reverse
With this function you can reverse the Tilt-movement.
Display on/off
With this function you can shut off the LED display (15)
PIN 3
PIN 2