Check that the fluid level is above the lower level
mark with the motorcycle in an upright position
Brake fluid must be added to the reservoir when
ever the fluid level begins to reach the lower level
matk . Fill the reservoir up to upper level mark.
B RAKE LINING
CAUTION:
Check if it is short of brake fluid, check the
hose and other components for corrosion or
cracks.
WARNING!
If the brake system or brake linings have to
be repaired, we suggest that these repair should
be performed by your authorized SKYTEAM
d e a l e r. S K Y T E A M d e a l e r k n o w s y o u r
motorcycle best and is dedicated to your
complete satisfaction.
The main points for checking the front brake lining
are to see whether the lining wear is out of the range.
Replace the brake lining wear is out of the range.
Replace the brake lining if the lining wear is beyond
the brake wear limit mark.
lower level mark
limit mark
37
REAR BRAKE
Rear brake pedal adjustment:
1. Check freeplay by slowly depressing the brake
pedal until the brake starts to engage ( Freeplay 20-
30mm)
2. Apply the brake, release it , and then spin the
wheel and check that it rotates freely. Repeat this
procedure several times.
3. After adjustment, perform the check and make
sure the cut-out of the adjusting nut is seated on the
brake arm pin.
CAUTION:
The high pressure brake is used by disc brake
system. To ensure the safety, the replacement
interval of oil pressure line and brake fluid
should not be more than that stipulated in
"MAINTENANCE SCHEDULE" of this
manual.
Before riding the motorcycle, be sure to check daily
the following items:
(1) Check the front brake system for leakage of
brake fluid.
(2) Check the oil pressure line for leakage of fluid
or tears.
(3) Check the brake lever and brake pedal for
freeplay.
(4) Check the front brake lining for wear.
WARNING!
When the new brake lining begins to be used,
don't ride your motorcycle immediately after the
replacement. Apply the brake, release it, then
spin the wheel and check that it rotates freely.
Repeat this procedures several times and allow
the brake fluid to circulate normally.
20~30mm
38