OPERATING MODE
DMX
512Control Mode
The scanner DMX512 signal formats using 1-512 channel control.
Specific channel is set to
：
page4
LINE
EN
I
page5
1.DMX512 [address set]
This feature allows you to change device address value.
1, press the ESC key one or more, until the show "a. 001." At this time to press the
?UP" or "DOWN" will be the key to the It functions table.
2, press "ENTER", the letter "A" to put out, use "UP" or "DOWN" keys to select the
address value "001-512", Press "ENTER" confirm exit or press the "ESC button" give
up exit.
3. to accept the host synchronous (i.e. from machine model) the address value is
set for "001".
4, in the display address value condition, such as no DMX controller device connected,
the screen will flash, such as device to connect DMX control Implement, display will not
shine, and DMX signal for signal and flashing lights.
2
、
PAT1
SUAP----OFF Pan,Tilt normal
ON Pan,Tilt interchange
P,1NU----OFF Pan, foreward
ON Pan, inversion
T,1NU----OFF Tilt foreward
ON Tilt inversion
3
、
PTSP---- NORN
FAST
SLOU
4
、
PER5 DISP---ON : Display often ON
10S : Monitor doesn't operate 10 S shut
TURN---Monitor Positive and negative display
DRE5---ON,OFF
SCUT---ON,OFF Color design reset direction
5
、
DFSE----FACT----LOAD
6.INFO---Lamp software information and history
7,NAN----Automatic operation set
CH01:0--255
...........
CH12:0-255
8.TEST: Automatic operation mode, and as a MASTER advocate the lamp .
SOUN-----RUN sound control
AUTO--- -RUN Automatic control
9:REST:
3.1.2..6.6.1 Please check the voltage, frequency data of power sup-
ply system id suitable for the mentioned on the projector. Please do
avoid the different voltage between them and burn the projector.
3.1.2.6.6.2 Please refer to the actual wattage of the projector`s
lamp multiply 1.5 multiple multiply total quantity of the projector then
you could get the minimum power supply loading. Lf your power cable
can`t share the minimum power supply loading.Please don`t connect
all the porjectors meantiome.
