If the batteries are still not performing well after trying all the modes as in the
manual, refer to the battery rescue steps below:
1, Use the REFRESH & ANALYZE mode once to three times.
2, Change to BREAK-IN mode if the capacity is still low.
3, If the second steps can improve the battery capacity by more than 10%, please
try BREAK-IN mode once to three times again. If there are no significant
improvements and the actual battery capacity is less than 60% of its rated capacity.
The battery would probably be at the end of its life and needs to be replaced.
RESCUE BATTERIES
The charger will display rate, capacity, internal resistance, voltage, working mode,
and elapsed time.
This is the value above "mA" which means the charge or
discharge rate.
Note: The value will be slightly changed based on the selected
rate due to the pulse charging.
DISPLAYED INFORMATION
Charge / Discharge Rate
This is the value above "mAh" which means the total charged or
discharged capacity.
Capacity
SKYRC NC2200 16.
SKYRC NC2200 Instruction Manual