To start the TURBO CHARGE mode
1, Press and hold the button for five seconds to start the TURBO mode for
those slots being in the charging process.
2, The LED indicator will be solid red during the charging process.
3, The LED indicator will be solid green once charging is completed.
Please refer to BATTERY KNOWLEDGE on page 6 to select an appropriate rate
to discharge the batteries.
DISCHARGE MODE
To start the DISCHARGE mode.
1, Insert the batteries into the slots.
2, Short-press the or buttons to select the DISCHARGE mode when
"CHARGE" is blinking and click the button to confirm.
3, Short-press the or buttons to select the appropriate discharge rate when
"SET DISCHARGE RATE" is displayed and click the
button to start discharging.
Note: If you would like to apply this setting to all the rest slots, PRESS and HOLD the
button for two seconds to start discharging.
To determine the battery performance based on the capacity amount it can hold
after a charge, discharge, and charge cycle, please refer to the BATTERY
KNOWLEDGE on page 6 to select an appropriate rate.
REFRESH & ANALYZE MODE
4, The LED indicator will be solid red during discharging.
5, The LED indicator will be solid green after discharging is completed.
13. SKYRC NC2200
SKYRC NC2200 Instruction Manual